logo

제품 세부 정보

Created with Pixso. Created with Pixso. 상품 Created with Pixso.
EV 배터리 시험 장비
Created with Pixso.

1000L Capacity High and Low Temperature Low Pressure Battery Environmental Test Chamber for EV Battery Testing

1000L Capacity High and Low Temperature Low Pressure Battery Environmental Test Chamber for EV Battery Testing

브랜드 이름: Sinuo
모델 번호: SN5511C-1000L
MOQ: 1
가격: Customized
지불 조건: 티/티
공급 능력: 1 세트/월
자세한 정보
원래 장소:
중국
인증:
Calibration Certificate (Cost Additional)
외부 챔버 크기:
너비*높이*깊이: 3250*1400*2000mm
내부 챔버 크기:
너비*높이*깊이: 1000*1000*1000mm
냉각 방식:
공냉식
온도 범위:
-40+~+70 ℃
냉각 시간:
20℃ → -40℃, 30분 이내
가열 시간:
20℃ → +100℃, 30분 이내
압력 요동:
≤ ±2kPa(1bar ~ 40kPa);
감압 시간:
5kPa까지 30분 이하
포장 세부 사항:
다른
공급 능력:
1 세트/월
강조하다:

1000L Capacity Battery Environmental Test Chamber

,

High and Low Temperature Battery Testing Equipment

,

Low Pressure Environmental Simulation Device

제품 설명
1000L High and Low Temperature Low Pressure Battery Environmental Test Chamber
This high-precision environmental simulation device is designed for reliability testing of batteries and electronic products. It conducts long-term stable testing under low temperature, high temperature, low pressure, and combined conditions. The equipment features microcomputer PID control for precise regulation of temperature, humidity, and pressure, with air-cooled mechanical cascade compression refrigeration, finned-tube electric heating, vacuum pumping, and manual pressurization functions.
Additional safety features include a blast-proof pressure relief system, carbon dioxide automatic fire suppression system, multiple safety protection devices, and an advanced programmable control system. The chamber supports programmable testing, data acquisition, and remote monitoring, making it ideal for environmental resistance testing in battery, electronics, and aerospace industries.

Technical Specifications
Performance Parameters
Cooling Method Air-cooled
Temperature Range -40℃ to +70℃
Temperature Fluctuation ≤ 0.5℃ (ambient pressure, no load)
Temperature Deviation ≤ ±2.0℃ (ambient pressure, no load)
Heating Time 20℃ to +100℃, ≤ 30 min (ambient pressure)
Cooling Time 20℃ to -40℃, ≤ 30 min (ambient pressure)
Pressure Range Ambient pressure to 5 kPa (commonly 11.6 kPa)
Pressure Deviation ≤ ±2 kPa (≥ 40 kPa) / ≤ ±5% (2-40 kPa)
Pressure Fluctuation ≤ ±2 kPa (1 bar ~ 40 kPa); ≤ ±5% (40 kPa ~ 2 kPa)
Depressurization Time ≤ 30 minutes to 5 kPa
Structural Features
Sample Specifications Selectable voltage: 12V, 24V, 36V, 48V
Max battery size: 720*480*600 mm
Weight: 280 kg
Max voltage: 56V
Max current: 300A
Inner Chamber Dimensions 1000*1000*1000 mm (W*H*D)
Outer Dimensions 3250*1400*2000 mm (excluding protrusions)
Outer Wall Material 1.5 mm painted iron sheet
Inner Wall Material SUS304 stainless steel (5 mm, pressure-bearing structure)
Insulation Material Rigid polyurethane foam
Chamber Door Single door with explosion-proof handle, viewing window, internal lighting
Lead-through & Terminal Posts One Φ100 mm lead-through on left side; sealed terminal flange
Manual Inflation Valve For manual pressure equalization during power failure
Shelves Two stainless steel shelves
Chamber Heater Stainless steel finned tube heater
Heater Control SSR (solid state relay) pulse-width modulation
Vacuum Pump VD401 ULVAC direct-drive, air-cooled, single-stage rotary vane vacuum pump
Vacuum Sensor UNIK 5072 (GE, USA), Range: 0-200 kPa, Accuracy: ±0.2% FS.BSL
Testing Program Requirements
Test batteries and battery packs shall be stored at 75 ± 2°C for at least 6 hours, followed by storage at -40 ± 2°C for at least 6 hours. The maximum time interval between extreme test temperatures shall be 30 minutes. This cycle shall be repeated 10 times. Afterward, all test units shall be stored at ambient temperature (20 ± 5°C) for 24 hours. For large batteries and battery packs, exposure time at extreme test temperatures shall be at least 12 hours.

Product Images
1000L Capacity High and Low Temperature Low Pressure Battery Environmental Test Chamber for EV Battery Testing 0 1000L Capacity High and Low Temperature Low Pressure Battery Environmental Test Chamber for EV Battery Testing 1